SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 15 | 5,08 € | 96,63 € |
| 30 | 10,16 € | 91,55 € |
The SKF NJ211 ECJ/C3 cylindrical roller bearing, measuring 55x100x21 mm, with a sheet steel cage and C3 clearance, offers a high-load-capacity solution for radial guidance.
The SKF NJ211 ECJ/C3 cylindrical roller bearing is a single-row roller bearing with an optimised internal design. It primarily accommodates high radial forces and, thanks to its NJ design, supports shafts in the axial direction. Designed as an open bearing, it is suitable for operation in oil- or grease-lubricated housings at temperatures ranging from -30 to +150 °C.
This design is used when, in addition to high radial forces, unilateral axial forces are also present. Thanks to two fixed flanges on the outer ring and one fixed flange on the inner ring, the component functions as a support bearing. In the opposite direction, the design allows for axial displacement, which compensates for changes in the shaft’s length. The inner ring can be removed from one side, which facilitates the separate assembly of both bearing rings.
The increased radial clearance (C3) compensates for operational heating and thermal expansion. It helps to prevent stress build-up in the case of tight fits or temperature differences between the inner and outer rings. The sheet steel cage guides the cylindrical rollers precisely and withstands vibrations. In terms of precision, this design combines dimensional accuracy to P0 or ABEC 1 with increased running accuracy to P6 or ABEC 3.
The NJ design is characterised by two solid flanges on the outer ring and one solid flange on the inner ring. This enables the bearing to accommodate radial loads as well as axial forces in one direction. In the opposite axial direction, it allows for shaft displacement, thereby compensating for thermal linear expansion without causing internal stress.
This cylindrical roller bearing has an inner diameter of 55 mm, an outer diameter of 100 mm and a width of 21 mm. The outer ring is designed without a lubrication groove or lubrication holes, so that the bearing fits smoothly into the housing bore.
The suffix C3 indicates a slightly increased radial bearing clearance compared with the standard version. This creates greater clearance between the rollers and raceways when cold. This prevents seizing if tight fits are used or if significant temperature differences arise between the shaft and housing during operation.
As the bearing is supplied from the factory without integrated sealing washers, protection against dirt and moisture must be provided by the surrounding housing structure. The bearing can be flexibly supplied via oil or grease circulation systems and operates within a temperature range of -30 to +150 °C.
The bearing combines two standardised tolerance classes: the dimensional accuracy of the mounting dimensions complies with standard tolerance P0 (or ABEC 1), whilst the concentricity and running accuracy meet the more precise P6 class (or ABEC 3). This combination ensures smooth running when high demands are placed on rotational accuracy.
The inner ring of the cylindrical roller bearing can be removed from one side. This makes it possible to press the inner and outer rings onto the shaft and housing independently of one another. This separate assembly simplifies installation and removal procedures in confined machine designs.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership