SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 2 | 41,55 € | 789,52 € |
| 3 | 83,11 € | 747,96 € |
The SKF NU232 ECM/C3 cylindrical roller bearing, with a 160 mm bore and a robust floating-type design, offers a heavy-duty solution for demanding industrial applications.
This single-row NU232 ECM/C3 cylindrical roller bearing is specifically designed for very high radial loads. With an outer diameter of 290 mm and a width of 48 mm, this version features an optimised internal design and a robust brass cage. As an open rolling bearing without an integrated seal, the bearing can be flexibly connected to external lubrication systems and is suitable for operating temperatures ranging from –30 to +150 degrees.
In shaft mountings subject to high radial forces, this design acts as a non-locating bearing. As the inner ring can be removed from both sides, the bearing compensates for axial changes in shaft length directly within the bearing without any binding. At the same time, the separable design simplifies the separate mounting of the inner and outer rings onto the shaft and housing. The outer ring has no groove or lubrication bore, which requires a targeted supply of lubricant via the adjacent structure.
The solid brass cage guides the cylindrical rollers precisely and withstands severe vibrations and dynamic accelerations during continuous operation. The slightly increased radial clearance (C3) counteracts operational stress on the rolling elements should temperature differences arise between the shaft and housing during operation, or where tight fits are specified. With dimensional accuracy P0/PN or ABEC 1 and running accuracy to P6 or ABEC 3, this design combines standardised mounting dimensions with enhanced concentricity.
The bearing has an inner diameter of 160 mm, an outer diameter of 290 mm and a width of 48 mm. These dimensions define the single-row roller bearing as a robust component for heavy-duty shaft support applications in mechanical and plant engineering.
The designation NU refers to a cylindrical roller bearing whose outer ring has two fixed flanges, whilst the inner ring has no flanges. This allows the inner ring to be removed from either side, making the bearing a purely floating bearing for compensating for axial displacement.
The designation C3 indicates greater radial bearing clearance compared with the standard version. This additional clearance compensates for thermal expansion at high operating temperatures or radial contraction caused by tight fits, thereby preventing the rollers from seizing.
The specified operating temperature range is from -30 to +150 degrees. As the bearing is of an open design and has no elastic sealing elements, the actual temperature limit depends primarily on the lubricant selected and the lubrication supply.
A brass cage is characterised by high strength, low wear and good run-on properties. It withstands mechanical shock loads and severe vibrations, and reliably maintains the correct spacing between the cylindrical rollers even under demanding operating conditions.
As this open bearing does not have any integrated sealing washers, the housing assembly requires external sealing. Depending on the speed and operating conditions, lubrication can be provided by oil or grease; however, the outer ring does not have its own lubrication bore.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership