Cylindrical Roller Bearings FAG NJ2213 -E-XL-TVP2

The FAG NJ2213 -E-XL-TVP2 cylindrical roller bearing withstands high radial loads and supports shafts axially in one direction, with dimensions of 65 × 120 × 31 mm.

The FAG NJ2213 -E-XL-TVP2 cylindrical roller bearing is a single-row rolling bearing with a bore diameter of 65 mm, an outer diameter of 120 mm and a width of 31 mm. Thanks to the line contact of the cylindrical rollers, the design transmits high radial forces. The NJ version features two fixed flanges on the outer ring and one fixed flange on the inner ring. This enables the bearing to compensate for axial length changes in one direction whilst simultaneously performing single-sided guidance functions.

What functions does the NJ2213 -E-XL-TVP2 cylindrical roller bearing perform as a support bearing?

As a support bearing, this component primarily absorbs high radial forces and also supports axial guidance forces from one direction. As the inner ring can be pulled out from one side, the inner and outer rings can be fitted separately. This design facilitates installation in confined spaces and where there are tight fits on the shaft and housing.

What are the distinctive features of the version with a polyamide cage?

The suffix TVP2 denotes a polyamide cage. This material is characterised by its low weight and damping properties, which contribute to smooth running. The bearing has standard radial clearance and a tolerance class of P0/PN (ABEC 1), and is designed for operating temperatures ranging from -30 to +120 degrees. In the open version without integrated sealing washers, lubrication and sealing are provided by the surrounding housing structure.