Cylindrical Roller Bearings FAG N212 -E-XL-TVP2

The N212 -E-XL-TVP2 cylindrical roller bearing from FAG Wälzlager is a single-row non-locating bearing measuring 60x110x22 mm, offering high radial load-carrying capacity whilst allowing for axial displacement.

The N212 -E-XL-TVP2 cylindrical roller bearing from FAG Wälzlager, as a single-row roller bearing, withstands high radial loads. With key dimensions of 60 mm bore diameter, 110 mm outer diameter and 22 mm width, this model features an open design. A polyamide cage guides the rollers with low friction between the raceways. With standard radial clearance and tolerance class P0 (ABEC 1), this design is suitable for industrial drives and shaft mountings.

In which applications is the N212 -E-XL-TVP2 cylindrical roller bearing used?

This cylindrical roller bearing is primarily used where high radial loads occur and the design requires a separate idler bearing. Thanks to the line contact of the cylindrical rollers, the component can withstand high radial forces. Typical applications are found in mechanical engineering in shaft mountings which, in addition to heavy radial loads, must also compensate for axial thermal expansion.

What are the distinctive features of the N design of the N212 -E-XL-TVP2 cylindrical roller bearing?

In the N design, the inner ring has two fixed guide flanges, whilst the outer ring is manufactured without flanges. This allows the outer ring to be pulled off from both sides, which simplifies the separate assembly of both bearing rings. During operation, the bearing compensates for axial changes in the shaft’s length internally without any binding. As the outer ring has neither lubrication holes nor lubrication grooves, the open design requires an external lubricant supply within the housing.