Axial Spherical Roller B. SKF 29324 E

The SKF 29324 E axial self-aligning roller bearing accommodates high unilateral axial loads with a 120 mm bore and an outer diameter of 210 mm.

The SKF 29324 E axial self-aligning roller bearing is a single-direction rolling bearing designed for demanding industrial applications. It accommodates heavy axial loads and automatically compensates for misalignment or shaft deflection during operation. Manufactured from standard 100Cr6 rolling-bearing steel in the Explorer performance class, this design combines load-carrying capacity with smooth running. With dimensions of 120 mm bore, 210 mm outer diameter and 54 mm width, the bearing is suitable for heavy-duty shaft mountings.

What is the 29324 E axial self-aligning roller bearing suitable for?

This rolling bearing is particularly suitable for designs in which high unilateral axial forces act on rotating shafts. Its use is recommended in bearing arrangements subject to high axial loads and simultaneous misalignment. Thanks to the spherical housing raceway, the bearing compensates for misalignment between the shaft and the housing without increased edge pressure. If required, the design can also accommodate moderate radial forces, provided that a sufficient minimum axial load is applied.

What are the distinctive features of the sheet steel cage and the Explorer design?

SKF’s Explorer design is characterised by a tailored internal geometry and refined contact surfaces. The integrated sheet steel cage guides the barrel-shaped rollers precisely and withstands thermal stresses in the range from –30 to +200 degrees. As a single-acting design, this bearing supports thrust forces exclusively in an axial direction, which must be taken into account during design and installation.