Axial Spherical Roller B. SKF 29318 E

The SKF 29318 E axial self-aligning roller bearing, with a 90 mm bore, 155 mm outer diameter and 39 mm width, accommodates high axial loads on one side.

The 29318 E axial self-aligning roller bearing is primarily used where heavy axial loads act on shafts and misalignment must be compensated for at the same time. As a single-direction rolling bearing made from standard bearing steel (100Cr6), it provides stable support for components and, thanks to its crowned rollers, accommodates misalignment between the shaft and the housing. Manufacture to standard tolerance P0/PN (ABEC 1) ensures reproducible fits in industrial mechanical engineering.

What is the 29318 E axial self-aligning roller bearing suitable for in operation?

This bearing is primarily suitable for designs subject to high axial forces at moderate speeds. Typical applications include shaft mountings where heavy axial loads and shaft deflection occur. The spherical housing raceway allows the roller set to self-align. This prevents the bearing from experiencing excessive edge pressures on the rolling elements and reduces internal stresses caused by dynamic angular misalignment under load.

What are the advantages of the Explorer version with a sheet steel cage?

The Explorer version from SKF is characterised by a optimised internal geometry and refined contact surfaces. In combination with the guided sheet steel cage, the 29318 E axial self-aligning roller bearing retains its dimensional stability and is suitable for a temperature range of –30 to +200 degrees. When designing the system, it is important to ensure that a minimum axial load is always applied to the single-sided bearing to prevent slippage between the rollers and raceways.