Axial Deep Groove Ball B. SKF 51313

The SKF 51313 axial deep groove ball bearing accommodates pure axial forces in one direction and is designed for shafts measuring 65 x 115 x 36 mm.

The 51313 axial deep-groove ball bearing is designed as a separable bearing. It consists of a shaft ring, a housing ring and a guided ball set. The manufacturer, SKF, produces this model from standard rolling-bearing steel (100Cr6) to tolerance class P0/PN or ABEC 1. With this type of bearing, you fit the components one after the other onto the shaft and into the surrounding housing. The open design makes it easier to apply lubricant directly whilst the bearing is in operation.

What loads does the 51313 axial deep-groove ball bearing support?

This rolling bearing supports rotating shafts axially in one direction. Designs subject to purely axial loads constitute the primary area of application, as the bearing must not absorb any radial forces. The assembly accommodates longitudinal forces only and guides the shaft in the axial direction. You should use this component wherever firm, play-free axial support is required.

What is important when installing a single-direction bearing?

Design engineers must provide flat and perpendicular mounting surfaces, as this type of bearing is not angle-adjustable. Even slight misalignments between the shaft and the housing lead to uneven load distribution across the rolling elements. The integrated sheet steel cage guides the balls within a temperature range of -30 to +150 degrees. When designing, please note that the scope of supply comprises only the axial deep-groove ball bearing without shims.