Axial Deep Groove Ball B. SKF 54410

The SKF 54410 double-acting axial deep groove ball bearing accommodates pure axial forces in both directions and has dimensions of 40 × 110 × 83.2 mm.

The SKF 54410 axial deep-groove ball bearing is a double-acting axial bearing designed to accommodate axial loads from both directions in mechanical engineering applications. Manufactured from standard roller bearing steel (100Cr6), this component guides shafts in the axial direction. The dimensions are 40 mm bore diameter, 110 mm outer diameter and 83.2 mm mounting width. Fitted with a sheet steel cage, the design is suitable for operating temperatures ranging from –30 to +150 degrees. The bearing must not be subjected to radial loads.

What is the 54410 double-acting axial deep-groove ball bearing suitable for?

This axial bearing is suitable for bearing arrangements where alternating or bidirectional axial forces occur. Typical applications include axial shaft guides with axial loads acting on both sides. As it transmits purely axial forces, the bearing arrangement requires a separate radial guide. The sheet steel cage and the 100Cr6 material provide a solid basis for industrial use under consistent lubrication conditions within a temperature range of -30 to +150 degrees.

How does the angular adjustability of the 54410 axial deep groove ball bearing facilitate installation?

When used in conjunction with suitable washers, the bearing is angularly adjustable to compensate for misalignment in the connected structure. Please note during planning that the scope of supply comprises solely the axial deep-groove ball bearing without washers. With standard tolerances in accordance with tolerance class P0/PN or ABEC 1, the model fits into standard fits used in general mechanical engineering. To ensure correct installation, match the shaft and housing seats to the component dimensions of 40x110x83.2 mm.