Axial Deep Groove Ball B. SKF 51410

The SKF 51410 axial deep groove ball bearing, measuring 50x110x43 mm, withstands high axial forces on one side in industrial machinery.

The 51410 axial deep groove ball bearing is designed as a single-direction axial bearing and supports shafts in a defined axial direction. The design, made from standard rolling-bearing steel (100Cr6), features a sheet steel cage that guides the rolling elements evenly. With an inside diameter of 50 mm, an outside diameter of 110 mm and a height of 43 mm, the 51410 bearing offers a robust cross-section for demanding applications. The bearing is manufactured by SKF and complies with the standard tolerance class P0/PN or ABEC 1.

What is the 51410 axial deep-groove ball bearing suitable for?

This rolling bearing is designed to support purely axial loads parallel to the shaft axis. Due to its design, this type of bearing cannot accommodate radial forces, which is why you should provide separate radial support in your designs. Typical applications include vertical shaft mountings and gearbox arrangements where unilateral thrust occurs. The permissible temperature range extends from –30 to +150 degrees Celsius, allowing the bearing to be operated flexibly in industrial environments with varying temperatures.

What is important when aligning a single-acting bearing?

As the bearing is not angularly adjustable, installation requires the bearing axis to be exactly perpendicular to the housing mounting surface. Misalignment or skewing leads to uneven load distribution across the rolling elements and increases wear. Please also note that this product scope comprises solely the axial deep-groove ball bearing without a washer. For trouble-free operation, a permanent minimum axial load is also required to ensure that the balls do not slide within the cage but roll smoothly in the raceways.