51200 Axial Deep Groove Ball B. by SKF
51200 Axial Deep Groove Ball B. by SKF

SKF

Axial Deep Groove Ball B. SKF 51200

Technical data
 
Inner diameter
10 mm
Outer diameter
26 mm
Width
11 mm
Cage
Sheet steel cage
Running accuracy
Tolerance class P0/PN2 / ABEC 1
Product range
Axial deep groove ball bearing
Operating direction
Single direction bearing
Angular adjustment
Non-angle adjustable
Weight
0,03 kg
Scale quantity Your discount Unit price
10 1,04 € 19,73 €
25 2,07 € 18,70 €
50 3,12 € 17,65 €
20,77 €
inkl. MwSt, zzgl. Versandkosten

5 ready to ship

Axial Deep Groove Ball B. SKF 51200
In Stock

Axial Deep Groove Ball B. SKF 51200

The SKF 51200 axial deep groove ball bearing reliably accommodates unidirectional axial forces whilst maintaining compact dimensions of 10 × 26 × 11 mm.

The SKF 51200 axial deep groove ball bearing supports shafts under purely axial loading. As a single-direction rolling bearing, it performs guidance functions and transmits loads directly via the raceways. The design is made from standard rolling-element bearing steel (100Cr6) and houses the rolling elements in a sheet steel cage. The bearing retains its dimensional stability at operating temperatures ranging from -30 to +150 degrees. The bearing unit is supplied without a washer for direct mounting on flat housing surfaces.

What is the 51200 axial deep-groove ball bearing suitable for?

This axial deep-groove ball bearing supports components that are subjected to axial forces from one side. As the design is intended to withstand purely axial loads, no radial loads must act on the bearing rings. Typical applications include bearings and mechanical assemblies where axial forces need to be guided within a confined space.

Thanks to its dimensions – a 10 mm bore, 26 mm outer diameter and 11 mm height – you can integrate the bearing into slim designs in a space-saving manner. As the design is not angle-adjustable, the mounting surfaces must be exactly perpendicular to the shaft axis.

What is important to bear in mind regarding tolerance class P0 and assembly?

The 51200 axial deep-groove ball bearing complies with tolerance class P0 (ABEC 1) and thus meets the standard accuracy requirements for industrial mechanical engineering. As there is no angular adjustment, the housing flange requires a rigid and flat mounting surface to prevent localised overloads on the raceways.

The unsealed design requires a protected installation environment and appropriate lubrication. Always combine the component on the shaft with separate radial bearings to ensure that transverse forces do not compromise the axial guidance.

What are the dimensions of the 51200 axial deep-groove ball bearing?

With a bore of 10 mm, an external diameter of 26 mm and a width of 11 mm, this component enables space-saving designs in mechanical engineering where high axial forces need to be absorbed within a confined installation space.

What loads can the 51200 axial deep-groove ball bearing withstand?

Designed as a single-direction axial bearing, this type is intended to transmit axial forces from a single direction. The bearing must not be subjected to radial loads. An additional radial bearing must therefore be incorporated into the overall design to absorb radial forces separately.

What is the temperature range for which the bearing is designed?

Manufactured from standard roller bearing steel (100Cr6) with a sheet steel cage, the bearing is suitable for use in a temperature range from -30 to +150 degrees. The maximum permissible operating temperature also depends on the properties of the selected lubricant, which should be suited to the operating environment.

Can the 51200 axial deep-groove ball bearing compensate for angular misalignment?

No, the 512 series is not angle-adjustable. The bearing is sensitive to misalignment or skew between the shaft and the housing. The mating surfaces on the shaft and housing must be perfectly flat and perpendicular to the shaft axis to prevent uneven edge loads.

What does tolerance class P0 mean for this axial bearing?

Tolerance class P0 (equivalent to ABEC 1 or PN) defines the permissible limit deviations for dimensional and running accuracy. It represents the tried-and-tested standard tolerance and is suitable for the vast majority of standard industrial applications where no higher precision classes are required.

Is a washer included in the scope of delivery?

The scope of supply includes the single-acting axial deep-groove ball bearing without shims. The flat housing washer sits directly in the bearing seat. For applications with misalignment, variants with a spherical housing washer and a separate spherical shim would be required instead.

SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership

10012770
Product added to compare.
Product added to wishlist

Reset Password

New Account Register