51122 Axial Deep Groove Ball B. by FAG
51122 Axial Deep Groove Ball B. by FAG

FAG

Axial Deep Groove Ball B. FAG 51122

Technical data
 
Inner diameter
110 mm
Outer diameter
145 mm
Width
25 mm
Cage
Sheet steel cage
Running accuracy
Tolerance class P0/PN2 / ABEC 1
Product range
Axial deep groove ball bearing
Operating direction
Single direction bearing
Angular adjustment
Non-angle adjustable
Weight
1,08 kg
Scale quantity Your discount Unit price
15 4,50 € 85,45 €
30 9,00 € 80,95 €
89,95 €
inkl. MwSt, zzgl. Versandkosten

32 ready to ship

Axial Deep Groove Ball B. FAG 51122
In Stock

Axial Deep Groove Ball B. FAG 51122

The FAG 51122 axial deep-groove ball bearing accommodates unidirectional axial forces in mechanical engineering applications, with dimensions of 110 × 145 × 25 mm.

The 51122 axial deep-groove ball bearing is a separable rolling bearing from FAG Rolling Bearings designed to accommodate unidirectional axial forces. With an inside diameter of 110 mm, an outside diameter of 145 mm and a height of 25 mm, this component is suitable for shaft guidance in conventional mechanical engineering. Manufactured from standard rolling bearing steel 100Cr6, this axial bearing is characterised by a tried-and-tested basic design. The integrated sheet steel cage guides the rolling elements in an orderly manner along the raceways of the shaft and housing discs.

What is the 51122 axial deep-groove ball bearing suitable for in operation?

This bearing accommodates axial loads from a single direction only and provides axial support for rotating shafts against a housing. Due to its design, this type of bearing cannot transmit radial forces; therefore, radial forces must always be accommodated by separate radial bearings. Typical applications include assemblies and shaft guides with a strictly defined load direction. As the design is not angularly adjustable, the mating surfaces must be precisely aligned to avoid damaging edge stresses.

What are the characteristics of tolerance class P0 and the sheet steel cage?

With the standard tolerance class P0 (equivalent to PN or ABEC 1), the bearing meets common requirements for dimensional and running accuracy. The sheet steel cage maintains an even spacing between the balls and retains its shape within a temperature range of -30 to +150 degrees. Please note during design that the scope of supply comprises only the axial deep-groove ball bearing without washers. The shaft washer and housing washer can be fitted separately for installation.

What forces does the 51122 axial deep-groove ball bearing withstand?

The roller bearing supports only axial forces acting in one direction. This design is not intended for radial loads. In engineering applications, it is therefore usually combined with separate radial bearings, which specifically absorb radial forces on the shaft and guide the shaft.

What are the dimensions of the 51122 axial deep-groove ball bearing?

This version has a bore of 110 mm at the shaft flange, an outer diameter of 145 mm at the housing flange, and a total width or height of 25 mm. These specified dimensions enable a precise fit when replacing components in standardised assemblies and housings.

What is the approved temperature range for the bearing?

Thanks to its construction from 100Cr6 roller bearing steel and its sheet steel cage, the permissible temperature range is between -30 and +150 degrees. To ensure reliable operation at extreme temperatures, a lubricant with the appropriate temperature resistance must also be used for the open bearing.

Can the Model 51122 be used to compensate for misalignment?

No, the 51122 axial deep-groove ball bearing is not angle-adjustable. The flat housing flange does not allow for any misalignment between the shaft and the housing. To prevent impermissible edge stresses, the contact surfaces in the housing and on the shaft must be exactly perpendicular to the axis of rotation.

What does tolerance class P0 or ABEC 1 mean?

The designations P0, PN and ABEC 1 refer to the standard tolerance class for rolling bearings. They define standardised limit dimensions for dimensional and concentricity accuracy. Bearings in this class reliably meet the typical requirements of general mechanical engineering in accordance with the relevant standards.

Are washers included with the bearing?

The scope of supply comprises solely the single-direction axial deep-groove ball bearing itself, consisting of a shaft washer, a housing washer and a ball-cage assembly. Washers for compensating for angular misalignment are not included in the scope of delivery and are not provided for as standard in the design of this flat-mounted series.

Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/

10012713
Product added to compare.
Product added to wishlist

Reset Password

New Account Register