Axial Deep Groove Ball B. FAG 53222

The FAG 53222 axial deep-groove ball bearing, with dimensions of 110 × 160 × 40.2 mm, is designed to accommodate unidirectional axial forces in mechanical engineering.

The 53222 axial deep-groove ball bearing is designed as a separable rolling bearing to accommodate high axial loads in one direction. Manufactured from standard rolling-bearing steel (100Cr6), this bearing consists of a shaft ring with an internal fit, a spherical housing ring and the ball ring situated between them. Thanks to its separable design, the shaft ring, rolling element set and housing ring can be fitted separately. A dimensionally stable sheet steel cage guides the rolling elements along their circular path and prevents direct contact between the balls.

What loads does the 53222 axial deep-groove ball bearing support?

This design is specifically intended for the transmission of unidirectional axial forces and supports shafts axially against fixed housing surfaces. Typical applications include vertically mounted shafts or wherever continuous thrust forces need to be absorbed. It is important for the design that the load directions are strictly separated: this bearing does not accommodate radial forces. If radial loads occur in the system, additional radial bearings must be incorporated to guide the shaft.

When does the 53222 axial deep-groove ball bearing require a washer?

The housing washer for this bearing has a spherical outer surface. Only when combined with a hollow-spherical washer – which must be procured separately – does the system become angularly adjustable. This design compensates for misalignment or skew between the shaft and the housing bore during assembly. The washer is not included with this item. Provided the housing already has a suitable spherical counter-contour, the housing washer can also be fitted directly into it.