Tapered Roller Bearings FAG 33020

The FAG 33020 tapered roller bearing (100x150x39 mm) can withstand high combined radial and axial loads and features a sheet steel cage.

The 33020 tapered roller bearing is a single-row roller bearing from FAG that combines high radial forces with axial forces acting in one direction. The truncated conical rollers between the inner and outer rings create a line contact, enabling rigid and high-load-capacity bearing arrangements. With a bore of 100 mm, an outer diameter of 150 mm and a width of 39 mm, this design is suitable for demanding shaft mountings in mechanical engineering. You will receive a complete tapered roller bearing with standard tolerances for industrial use.

What is the 33020 tapered roller bearing suitable for in industrial plant?

The 33020 tapered roller bearing is used in bearing locations where high radial loads occur simultaneously with axial forces. Typical applications include gearbox shafts and heavy-duty drive trains in general mechanical engineering. As single-row tapered roller bearings, by design, can only accommodate axial forces in one direction, designers usually fit the component in pairs, with one bearing running in the opposite direction to the other. This arrangement in an O or X configuration ensures a play-free or specifically preloaded guidance of the shaft.

What advantages do the sheet steel cage and tolerance class P0 offer in the 33020?

The integrated sheet steel cage guides the tapered rollers and withstands vibrations during day-to-day operation. With a permissible temperature range of –30 to +120 degrees, the component covers typical operating conditions in industrial gearboxes. The tolerance class P0/PN (corresponding to ABEC 1) allows for easy replacement in standard applications. An advantage during assembly is that the inner ring with roller set and the flangeless outer ring can be fitted separately, which simplifies press-fitting and the adjustment of axial play.