Tapered Roller Bearings FAG 32011 -X-XL-P5

The FAG 32011 -X-XL-P5 tapered roller bearing offers precise guidance under combined loads, with compact overall dimensions of 55 x 90 x 23 mm.

The FAG 32011 -X-XL-P5 tapered roller bearing is a single-row rolling bearing designed to accommodate high radial forces combined with axial forces acting in one direction. Thanks to the tapered raceways of the inner and outer rings, the rolling elements roll without slippage. The complete bearing assembly comprises an inner ring with a set of rollers and the corresponding outer ring. As an open design, the bearing can be fitted and aligned separately during installation.

What is the 32011 -X-XL-P5 tapered roller bearing suitable for?

Design engineers primarily use this roller bearing where shafts must be guided axially whilst subjected to high radial loads. Typical applications include shaft mountings and gearboxes in general mechanical engineering. As a single tapered roller bearing, by design, can only accommodate axial forces in one direction, it is usually fitted in pairs in an O or X arrangement, mirroring a second bearing, in order to achieve axial guidance on both sides.

What are the advantages of tolerance class P5?

The manufacturing accuracy of tolerance class P5 (equivalent to ABEC 5) results in lower runout and dimensional deviations compared with standard tolerance. This increased precision ensures smooth running, reduces vibrations at higher speeds and facilitates the precise adjustment of bearing clearance. In combination with the dimensionally stable sheet steel cage and an operating temperature range of -30 to +120 degrees, the bearing is suitable for industrial applications with high demands on guidance accuracy.