FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 10 | 10,20 € | 193,84 € |
| 20 | 20,40 € | 183,64 € |
The FAG 31315 tapered roller bearing, with a 75 mm bore, 160 mm outside diameter and 40 mm width, can withstand high radial and axial loads.
The FAG 31315 tapered roller bearing is used as a single-row roller bearing in demanding shaft mountings. Thanks to the line contact of the tapered rolling elements, this design withstands high radial forces whilst simultaneously absorbing axial loads from one direction. The integrated sheet steel cage guides the rolling elements evenly along the raceway of the inner ring. With dimensions of 75 × 160 × 40 mm, this roller bearing is designed for industrial gearboxes and machine components subject to combined force directions.
When absorbing combined loads, the angled raceways transfer radial and single-direction axial forces directly into the housing structure. If axial loads occur from alternating directions, single-row tapered roller bearings are usually mounted in pairs in an X or O arrangement, mirroring each other. This arrangement supports alternating axial forces on both sides and allows for the precise adjustment of the required bearing clearance or specific preload during installation.
This complete bearing is manufactured to the standard tolerance P0, which corresponds to the ABEC 1 classification. This tolerance class meets the standard dimensional requirements in general mechanical engineering. As the inner ring with roller cage and the outer ring are supplied separately, the unit can be fitted to the shaft and housing in stages. For continuous operation, the permissible temperature range of -30 to +120 °C must be observed; the choice of lubricant should also be tailored to this range.
With an internal diameter of 75 mm, an external diameter of 160 mm and a total width of 40 mm, the bearing complies with standardised metric dimensions. Before installation, the shaft seat and housing bore must be checked to ensure that the correct tolerances for assembly are maintained.
Combined radial loads and axial forces from a single direction are transmitted simultaneously via the taper angle of the raceways. Where axial forces occur from alternating directions, in practice two individual bearings are mounted opposite each other, usually in the tried-and-tested O or X configuration on the shaft.
The operating range is specified for temperatures from -30 to +120 °C. Within these limits, the sheet steel cage and bearing rings retain their dimensional stability. The lubricant used should be suitable for these thermal conditions in order to maintain a load-bearing lubricating film in the rolling contact.
P0 denotes the standard precision for rolling bearings and corresponds to the ABEC 1 classification. This specification defines the permissible dimensional and runout tolerances of the rings. For the majority of industrial applications in mechanical engineering, this precision grade provides the required fit accuracy for standard-compliant bearing seats.
Thanks to its split design, the outer ring can be fitted separately from the inner ring and the roller set. This facilitates step-by-step installation in split housings and allows the axial bearing clearance to be precisely adjusted during assembly of the unit.
The sheet steel cage guides the tapered rollers at a uniform distance along the raceway of the inner ring. It prevents direct contact between the rolling elements, reduces friction losses and accommodates any vibrations that may occur within the permissible temperature range.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/