Tapered Roller Bearings FAG 32024 -X-XL-P5

The 32024 -X-XL-P5 tapered roller bearing from FAG Rolling Bearings offers enhanced positioning accuracy in tolerance class P5, whilst maintaining compact dimensions of 120 × 180 × 38 mm.

This single-row roller bearing accommodates high radial loads as well as single-sided axial loads. The tapered geometry of the raceways ensures that the rollers run with minimal slippage, which counteracts mechanical wear. A sheet steel cage maintains an even spacing between the rolling elements. The design is that of a complete tapered roller bearing and is rated for a temperature range of -30 to +120 degrees.

What is the 32024 -X-XL-P5 tapered roller bearing suitable for in industrial applications?

The bearing is designed for mounting arrangements where high combined loads are combined with stringent requirements for concentricity and dimensional accuracy. As single-row tapered roller bearings, by design, can only accommodate axial forces in one direction, in practice they are usually mounted in conjunction with a suitably aligned mating bearing in an O or X arrangement. This pairing enables precise adjustment of the axial bearing clearance.

What advantages does tolerance class P5 offer for this tapered roller bearing?

The P5 or ABEC 5 tolerance class is characterised by tighter dimensional, form and running tolerances. Compared with standard tolerances, the bearing exhibits lower radial and axial run-out deviations. This promotes low-vibration operation and facilitates precise alignment of the supported shaft. As the inner ring, including the roller set, and the outer ring are supplied separately, the component can be mounted onto the shaft and housing bore in stages.