DIVERS
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 2 | 73,29 € | 1.392,42 € |
| 3 | 146,57 € | 1.319,14 € |
The H3168 mounting sleeve is used to mount roller bearings with a tapered bore onto metric cylindrical shafts with a diameter of 320 mm.
The H3168 clamping sleeve allows rolling bearings with a tapered internal bore to be mounted on smooth or stepped shafts. The component has a bore of 320 mm, an external diameter of 440 mm and a width of 254 mm. The slotted sleeve is supplied together with the matching slotted nut and a retaining plate. It allows flexible positioning of the bearing along the shaft without the need for additional shoulders or shaft grooves.
This fastening element is used when bearings with a tapered bore are mounted on cylindrical sections of a shaft. By sliding the bearing onto the sleeve, the radial bearing clearance can be adjusted in a controlled manner. This facilitates the construction of stable bearing arrangements for larger shaft diameters, as there is no need to machine complex fit steps on the shaft.
The outer surface of the sleeve has a 1:12 taper, which is designed to match roller bearings with a tapered bore. When the supplied slotted nut is tightened, the bearing is pushed axially onto the taper. This causes the inner ring to expand slightly, thereby specifically reducing the bearing clearance and creating a tight press fit. The retaining plate engages positively in a groove in the nut and is designed to prevent the bearing from coming loose of its own accord during operation.
The H3168 clamping sleeve is a slotted machine component used to secure roller bearings with tapered bores onto cylindrical shafts. It has an internal bore of 320 mm, an external diameter of 440 mm and a width of 254 mm. It is fitted together with a slotted nut and a retaining plate.
The sleeve is designed for metric cylindrical shafts with a nominal diameter of 320 mm. As it is secured by friction, it can be used both on solid, smooth shafts without fixed stops and on stepped shafts with support rings.
The standard version is supplied with the appropriate slotted nut and the corresponding locking plate. These components allow the bearing to be moved axially along the sleeve and serve to prevent the threaded connection from rotating once the bearing clearance has been adjusted.
The raceway surface has a taper ratio of 1:12. This ratio is designed to work with roller bearings with a tapered bore and allows for a precise reduction in radial bearing clearance when the inner ring is pressed into place.
The enclosed retaining plate is used for securing the nut. Once the slotted nut has been tightened, a tab on the plate is bent into a recess around the circumference of the nut. This positive lock is designed to prevent the nut from coming loose accidentally as a result of vibrations or load cycles.