DIVERS
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 2 | 11,48 € | 218,17 € |
| 5 | 22,97 € | 206,68 € |
The H2336 clamping sleeve is used to mount roller bearings with a tapered bore onto metric 160 mm shafts; it is supplied complete with a slotted nut and a retaining plate.
The H2336 clamping sleeve allows you to mount roller bearings with a tapered bore on smooth or stepped cylindrical shafts. The mounting element has a bore of 160 mm, an outer diameter of 230 mm and a width of 161 mm. As stepped sections on the shaft are not strictly required, the unit can be positioned flexibly. The component is used in industrial drive systems where heavy bearings are axially clamped and secured.
This fastening element is particularly suitable for self-aligning roller bearings and self-aligning ball bearings with a tapered bore that are mounted on cylindrical metric shafts. By sliding the bearing onto the sleeve, the required reduction in radial clearance can be precisely adjusted during installation. Typical applications include heavy-duty industrial applications where shafts with a diameter of 160 mm require stable connections to withstand high radial forces.
The outer surface of the sleeve features a standardised 1:12 external taper, which is designed to match rolling bearings with a corresponding tapered internal bore. When the supplied slotted nut is tightened, the bearing slides axially onto the taper, causing the inner ring to expand and creating a positive fit. The supplied retaining plate engages positively in a groove in the nut to prevent the nut from loosening of its own accord during operation.
The sleeve has a bore diameter of 160 mm and is therefore designed to accommodate metric shafts of the corresponding size. The outer diameter at the widest point is 230 mm, with a total width of 161 mm. The outer surface has a tapered pitch of 1:12 to accommodate suitable inner rings for roller bearings.
In addition to the sleeve body itself, the assembly also comprises the matching grooved nut and the associated retaining plate. This combination allows for direct fitting without the need to purchase additional individual retaining elements. The grooved nut is used to press the inner ring into place in a controlled manner, whilst the plate prevents the nut from turning.
When the slotted nut is tightened, the tapered inner ring of the bearing moves axially onto the sleeve. This wedging action causes the inner bore of the sleeve to press against the cylindrical shaft, creating a positive fit. At the same time, the radial bearing clearance is reduced. Once the desired fit has been achieved, one tab of the retaining plate is bent into a groove in the nut.
This version is specifically designed for metric shafts with a nominal diameter of 160 mm. It can be fitted to both continuously smooth shafts and stepped shafts. On smooth shafts, it allows the bearing position to be freely adjusted along the axis without the need for prior machining of shaft steps.
The taper ratio of 1:12 describes the angle of the outer surface. It defines the continuous increase in diameter along the length of the sleeve to accommodate matching tapered inner rings. This ratio is tailored to corresponding designs of self-aligning roller and self-aligning ball bearings in order to achieve the desired interference fit during axial mounting.
Clamping sleeves secure the roller bearing by sliding the bearing onto the sleeve, with the groove nut sitting directly on the sleeve’s thread. Extraction sleeves, on the other hand, are pressed into the gap between the inner ring and the shaft. Furthermore, extraction sleeves usually require a solid shaft shoulder for support during assembly.