DIVERS
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 15 | 2,96 € | 56,19 € |
| 30 | 5,91 € | 53,24 € |
The H221 mounting sleeve is used to secure bearings with a tapered bore onto metric 95 mm shafts with a width of 60 mm.
The H221 clamping sleeve enables the installation of roller bearings with tapered bores on cylindrical, metric shafts. Thanks to the 1:12 taper, the fastening element clamps the bearing securely in place. You can position the unit flexibly on smooth or stepped shafts without having to create additional steps. The design includes the matching groove nut and a retaining plate. With a bore of 95 mm, an outer diameter of 140 mm and a width of 60 mm, the assembly is suitable for industrial applications.
This clamping sleeve secures self-aligning roller bearings or self-aligning ball bearings with a tapered internal bore onto solid or stepped shafts. The slotted sleeve body compensates for slight shaft tolerances and creates a positive friction lock. Typical applications include general mechanical engineering, conveyor systems and gearboxes subject to radial loads. Maintenance engineers use this solution to replace bearing units during maintenance, whilst designers reduce manufacturing costs by eliminating the need for shaft shoulders.
The 1:12 taper determines how far the bearing must be moved axially when the groove nut is tightened. This movement allows you to set the required radial bearing clearance. After tightening, the tab on the supplied retaining plate engages with a groove in the nut. This prevents the connection from coming loose of its own accord during operation. Before installation, ensure that the shaft surfaces are clean and that the dimensions match the 95 mm shaft.
The component has an internal diameter of 95 mm, an external diameter of 140 mm and a total width of 60 mm. The sleeve is designed for metric cylindrical shafts and has a tapered outer surface with a standard pitch ratio of 1:12 to accommodate suitable bearing bores.
In addition to the slotted sleeve body, the scope of supply includes the corresponding slotted nut and the matching retaining plate. This combination allows you to secure the roller bearing to the shaft and lock the screw connection in place to prevent it from coming loose unintentionally during operation. No additional fasteners are required for the initial assembly.
When a bearing with a tapered internal bore is slid onto the clamping sleeve, the radial bearing clearance decreases as the axial travel increases. By tightening the groove nut, you drive the bearing onto the 1:12 taper. The slotted sleeve body contracts elastically in the process, creating a tight press fit on the shaft.
This clamping sleeve is primarily used for mounting self-aligning roller bearings, self-aligning ball bearings or other rolling bearings with a tapered bore. With a bore diameter of 95 mm, the sleeve fits onto corresponding metric shafts in industrial gearboxes, fan units or conveyor systems.
The retaining plate prevents the slotted nut from coming loose due to operational vibrations or fluctuating torques. Once the bearing clearance has been adjusted, fitters bend an outer tab of the plate into one of the slots on the outer circumference of the slotted nut. This secures the axial position of the bearing.
Yes, clamping sleeves do not require a shaft shoulder or stop collar. They can be fitted at any position on a smooth metric shaft with a diameter of 95 mm. This simplifies shaft manufacture considerably, as no cut threads or keyways are required for the axial securing of the bearing assembly.