FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 15 | 2,32 € | 44,16 € |
| 30 | 4,65 € | 41,83 € |
The FAG 1212 -TVH-C3 self-aligning ball bearing, with dimensions of 60 × 110 × 22 mm, a polyamide cage and increased bearing clearance, provides effective compensation for shaft deflection.
The 1212 -TVH-C3 self-aligning ball bearing is a double-row rolling bearing made from standard 100Cr6 bearing steel with a cylindrical bore. Thanks to the shared spherical raceway in the outer ring, the bearing self-aligns during operation. This design compensates for angular misalignment and misalignment between the inner and outer rings without causing excessive wear. With a 60 mm bore, 110 mm outer diameter and 22 mm width, this version complies with tolerance class P0/PN or ABEC 1.
Design engineers and maintenance personnel use this design primarily for long shafts or flexible housings where operational deflection and misalignment occur. Typical applications are found in general mechanical engineering assemblies with dynamic deflection of the shaft axis. The double-row roller bearing primarily accommodates radial loads and guides the shaft even in the event of angular misalignment. As it is an open bearing, the lubricant can be flexibly adapted to the specific operating environment.
The designator ‘TVH’ indicates a polyamide cage, which reduces the weight of the rotating parts and promotes quiet operation. Together with the permissible temperature range of –30 to +120 degrees, the component operates stably even under demanding thermal conditions. The suffix combination C3 indicates a slightly increased radial clearance. This increased radial clearance helps to prevent the rolling elements from seizing if temperature differences arise between the inner and outer rings during operation or if tight fits are present.
With a bore of 60 mm, an outside diameter of 110 mm and a width of 22 mm, the bearing has standardised main dimensions. It is manufactured to the standard tolerance class P0/PN (corresponding to ABEC 1) with a cylindrical bore for mounting on cylindrical shafts.
The suffix TVH denotes a polyamide cage. This material is characterised by its low weight and quiet operation. The cage guides the two rows of balls within the bearing and is designed for operating temperatures ranging from -30 to +120 degrees.
The designation C3 indicates a slightly increased radial clearance compared with the standard version. The additional radial clearance compensates for thermal expansion when the inner ring becomes warmer than the outer ring during operation. As a result, the C3 bearing clearance helps to reduce stress in the rolling elements after installation.
The 1212 -TVH-C3 self-aligning ball bearing is an open design without integrated seals. Protection against dirt and moisture is provided by the surrounding housing structure. The open design allows for a flexible choice of lubricant – either oil or grease – as well as regular relubrication.
A continuous hollow spherical raceway in the outer ring allows the two rows of balls in the inner ring to adjust freely. If the shaft becomes misaligned or the housing undergoes elastic deformation, the inner ring pivots within the ball raceway, compensating for angular misalignment directly during operation.
The inner ring, outer ring and rolling elements are made from standard 100Cr6 rolling-bearing steel. This case-hardened chrome steel offers high dimensional stability. The cage, which guides the rolling elements, is made of polyamide, which keeps friction losses to a minimum and contributes to smooth running.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/