Self-Aligning Ball B. FAG 1310 -TVH

The FAG 1310-TVH angular contact ball bearing, measuring 50 × 110 × 27 mm, compensates for angular misalignment and features two rows of balls in a lightweight polyamide cage.

The 1310-TVH self-aligning ball bearing is a double-row rolling bearing made from standard 100Cr6 bearing steel for industrial use. Thanks to the shared spherical raceway in the outer ring, the bearing automatically adjusts itself in the event of shaft deflection or misalignment. With a bore of 50 mm, an outer diameter of 110 mm and a width of 27 mm, the design complies with tolerance class P0/PN or ABEC 1 and has standard radial clearance.

What is the 1310-TVH self-aligning ball bearing suitable for?

Design engineers and maintenance personnel select this self-aligning bearing primarily for mounting locations where misalignment between the housing and the shaft may occur. Typical applications are found in general mechanical engineering, in conveyor systems and on long drive shafts that deflect elastically under load. The open design allows direct connection to existing oil or grease lubrication systems, so that lubrication intervals can be adapted to the operating conditions of the plant.

What features does the version with a polyamide cage offer?

The design suffix ‘TVH’ indicates a polyamide cage that guides the rolling elements. Polyamide cages are characterised by low mass, elasticity and quiet operation. The component is suitable for a temperature range of -30 to +120 degrees. As this is an open bearing without integrated sealing washers, the installation location requires external sealing to prevent the ingress of dirt and moisture.