Deep Groove Ball Bearings FAG 6320 -M

The FAG 6320-M deep-groove ball bearing, with its brass cage and dimensions of 100 x 215 x 47 mm, offers high load-carrying capacity for demanding industrial drives.

The 6320-M deep groove ball bearing is a single-row rolling bearing with a 100 mm bore, an outer diameter of 215 mm and a width of 47 mm. FAG manufactures this component from standard roller bearing steel 100Cr6. Designed as an open bearing, it is suitable for oil- or grease-lubricated applications in mechanical engineering. Lubricants reach the rolling elements and raceways unimpeded. A robust brass cage guides the balls evenly and ensures low-vibration operation under mechanical loads.

Under what operating conditions is the 6320-M deep groove ball bearing with brass cage suitable?

The 6320-M deep groove ball bearing is suitable for mechanically stressed bearing locations that must accommodate high radial forces as well as axial forces on both sides. Thanks to the robust brass cage, this design proves particularly effective in the presence of strong vibrations, high acceleration forces or dynamically varying speeds. The metallic cage material guides the rolling elements evenly within the raceway and withstands impact loads during operation.

What are the technical characteristics of the 6320 -M deep groove ball bearing?

The designator ‘-M’ refers to the solid brass cage, which offers a higher mechanical load-carrying capacity than standard sheet metal cages. The bearing is manufactured with standard radial clearance and to tolerance class P0/PN or ABEC 1. The permissible operating temperature range is from –30 to +150 degrees. As the outer and inner rings are designed without sealing washers, protection against the ingress of dirt and the escape of lubricant is provided by the housing design of the bearing mounting.