SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 10 | 0,77 € | 14,54 € |
| 25 | 1,53 € | 13,78 € |
| 50 | 2,30 € | 13,01 € |
The SKF 6307 /C3 single-row deep-groove ball bearing, with dimensions of 35x80x21 mm and increased bearing clearance, offers a high level of operational reliability under thermal conditions.
The SKF 6307 /C3 deep groove ball bearing is an open radial rolling bearing made from standard bearing steel 100Cr6. With a bore of 35 mm, an outside diameter of 80 mm and a width of 21 mm, this design primarily accommodates radial loads as well as axial forces in both directions. It is manufactured to the standard tolerance class P0/PN (corresponding to ABEC 1). A guided sheet steel cage maintains an even spacing between the rolling elements and ensures smooth running.
This rolling bearing is primarily used in designs subject to high radial loads and requiring axial guidance. Thanks to its open design, lubricant can be supplied directly via the surrounding machine housing. This design is suitable for enclosed spaces where a housing seal against dirt and moisture is already in place. Thanks to its temperature resistance ranging from -20 to +150 degrees, the bearing operates without thermally induced microstructural changes, even under fluctuating operating temperatures.
The designation C3 indicates an increased radial bearing clearance compared with the standard version. This additional clearance between the balls and raceways is required when tight fits on the shaft and housing reduce the bearing clearance during installation. Furthermore, the C3 bearing clearance compensates for temperature differences between the rotating inner ring and the stationary outer ring. This reduces the risk of stress build-up during operation, thereby extending the service life of the drive system.
With an internal diameter of 35 mm, an external diameter of 80 mm and a width of 21 mm, the component complies with standardised connection dimensions. These dimensions enable it to be fitted precisely into the corresponding housing and shaft seats in mechanical engineering applications.
The designation C3 indicates an increased radial bearing clearance. This clearance compensates for operational thermal expansion and radial constriction caused by tight fits on the shaft or in the housing.
Open ball bearings do not have integrated cover plates or sealing washers. They are suitable for enclosed housings with separate sealing, in which the lubricant can circulate freely or is supplied via an external oil system.
The permissible temperature range is between -20 and +150 degrees. Both the standard roller bearing steel 100Cr6 and the sheet steel cage retain their dimensional stability and mechanical properties within this temperature range.
Inside the bearing, a sheet steel cage guides the row of balls at a uniform distance apart. This design reduces friction losses between the rolling elements and is compatible with both mineral oil-based and synthetic lubricants.
The roller bearing is manufactured to the standard tolerance class P0/PN, also known as ABEC 1. This design offers dimensional and running accuracy in accordance with standards for typical industrial and mechanical engineering applications.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership