Deep Groove Ball Bearings FAG 607 -2RSR

Compact FAG 607-2RSR deep-groove ball bearing with a 7 mm bore, 19 mm outer diameter and a seal that runs on both sides, for protected bearing locations.

The FAG 607 -2RSR deep groove ball bearing is a single-row miniature roller bearing designed for compact applications. With a bore of 7 mm, an outside diameter of 19 mm and a narrow width of 6 mm, this roller bearing supports shafts in confined spaces. Manufactured from standard roller bearing steel 100Cr6, the design primarily accommodates radial loads as well as moderate axial forces in both directions. The outer ring is cylindrical, without a flange or groove.

What applications is the FAG 607-2RSR deep groove ball bearing designed for?

This miniature ball bearing is designed for compact assemblies and precision mechanical shaft guides. Designs with limited installation space benefit from its small dimensions whilst still being able to accommodate combined forces. Thanks to its sealed design with protection on both sides, the bearing is suitable for applications where dirt particles or moisture must be kept away from the raceways. The bearing is supplied ready for installation and requires no relubrication during normal operation.

What are the key features of the 2RSR seal and the design?

The seal, which contacts the raceways on both sides and is identified by the suffix 2RSR, seals the interior against the ingress of contaminants and moisture. In addition, the contact seal helps to retain the lubricant within the bearing. The integrated sheet steel cage guides the rolling elements in an orderly manner and maintains a uniform spacing between them. The deep-groove ball bearing has a standard radial clearance within tolerance class P0/PN or ABEC 1 and is designed for an operating temperature range of -20 to +100 degrees Celsius.