Deep Groove Ball Bearings SKF 6015

The SKF 6015 single-row deep groove ball bearing, with a 75 mm bore and an 115 mm outer diameter, offers a solution for a wide range of radial loads.

The 6015 deep groove ball bearing is a single-row radial ball bearing made from standard 100Cr6 bearing steel. Manufactured in the SKF Explorer design, this bearing primarily accommodates radial forces and axial loads in both directions. With key dimensions of 75 mm inner diameter, 115 mm outer diameter and 20 mm width, this rolling bearing is widely used in mechanical and plant engineering. It features standard radial clearance and a sheet steel cage that reliably guides the rolling elements.

In which applications is the 6015 deep groove ball bearing used?

Design engineers and maintenance technicians prefer to use the 6015 deep-groove ball bearing in rotating machine systems where cylindrical shaft seats with a diameter of 75 mm are mounted. It is suitable for applications with predominantly radial forces and axial loads on both sides. The open design is intended for enclosed mounting spaces with an external lubricant supply. The cylindrical outer ring, which has no groove or flange, can be fitted precisely into housing bores.

What are the benefits of P6 dimensional accuracy and the open design?

This bearing combines enhanced dimensional accuracy to tolerance class P6 with standard running accuracy PN. Tighter manufacturing tolerances on the bore and outer diameter facilitate a precise fit on the shaft and within the housing. As the bearing is of an open design, it has no integrated sealing washers and requires an external housing seal to protect against dirt particles and moisture. The component is designed for an operating temperature range of –20 to +120 degrees, which meets the thermal requirements of typical industrial applications.