Deep Groove Ball Bearings SKF 6010 -2RS1

The SKF 6010-2RS1 deep groove ball bearing combines dimensions of 50x80x16 mm with ground seals on both sides and enhanced P6 running accuracy for demanding industrial applications.

The single-row deep-groove ball bearing 6010 -2RS1 is a versatile rolling bearing designed for radial loads as well as axial forces in both directions. SKF manufactures this model in the Explorer performance class from standard rolling bearing steel (100Cr6). Fitted with a sheet steel cage and standard radial clearance, this bearing is suitable for designs where defined fits and smooth running are required. The permissible temperature range is from –20 to +120 degrees Celsius.

In which applications does the 6010-2RS1 deep groove ball bearing prove its worth?

The bearing is primarily used in applications where rotating shafts need to be protected against ingress of particles or moisture. Typical applications are found in general mechanical engineering for rotating shafts and axles operating at medium to high speeds. With a width of 16 mm and an outer diameter of 80 mm, the design is suitable for applications with limited axial space. At the same time, the geometry of the deep raceways reliably accommodates combined loads.

What features do the 2RS1 seal and tolerance class P6 offer?

The suffix 2RS1 denotes contact seals fitted on both sides. This design protects the interior of the bearing from contamination and retains the factory-applied grease filling within the rolling element chamber. Tolerance class P6 (corresponding to ABEC 3) is characterised by tighter manufacturing tolerances for concentricity and dimensions compared with the standard tolerance. This promotes smooth, low-vibration operation with uniform rotational movement.