-
Bearings
Bearings
-
Housings/housing Units
Housings/housing Units
-
Linear Technology
Linear Technology
-
V-Belts
V-Belts
-
Seals
Seals
FAG
Deep Groove Ball Bearings FAG 6009 -RSR
- Technical data
- Inner diameter
- 45 mm
- Outer diameter
- 75 mm
- Width
- 16 mm
- Material
- Standard bearing steel
- Ball rows
- Single row bearing
- Seal
- Contact seal on one side
- Cage
- Sheet steel cage
- Clearance
- Normal radial clearance
- Running accuracy
- Tolerance class P0/PN2 / ABEC 1
- Current insulation
- No current insulation
- Bore
- Cylindrical bore
- Outer ring
- Without flange/groove
- Material of rolling elements
- Standard bearing steel
- Temperature range
- -30 to +100 °C
- Weight
- 0,239 kg
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 10 | 0,86 € | 16,28 € |
| 25 | 1,72 € | 15,42 € |
| 50 | 2,57 € | 14,57 € |
Deep Groove Ball Bearings FAG 6009 -RSR
The FAG 6009-RSR deep groove ball bearing, measuring 45x75x16 mm, offers proven load-carrying capacity and single-sided protection against the ingress of dirt.
This single-row deep-groove ball bearing 6009 -RSR from FAG accommodates radial forces as well as axial loads in both directions. Manufactured from standard rolling-element bearing steel (100Cr6), the ball bearing combines a bore of 45 mm, an outside diameter of 75 mm and a width of 16 mm. Manufactured to tolerance class P0/PN (ABEC 1) and with standard radial clearance, the component is suitable for precisely guided shafts in general mechanical engineering.
What is the 6009-RSR deep groove ball bearing suitable for in operation?
Design engineers prefer to use this bearing in industrial drive and shaft mountings. The deep-groove ball bearing proves its worth where one side of the housing is already enclosed in an oil bath or grease chamber, whilst the opposite side requires protection against dust or splash water. The sturdy sheet steel cage guides the rolling elements with minimal vibration. Furthermore, the permissible temperature range of –30 to +100 degrees allows for reliable use under demanding industrial environmental conditions.
What are the advantages of the single-sided RSR seal?
The suffix RSR denotes a single-sided sliding seal made of elastic material, which effectively repels dirt particles. The open rear side simultaneously allows unhindered access of lubricant from the inner housing area. Before installation, it is advisable to check the mounting direction to ensure that the sealing lip faces the exposed outer side. As the outer ring has no flange or groove, the rolling bearing can be pressed directly into smooth housing bores.
What are the key features of the 6009-RSR deep-groove ball bearing?
A single-row radial ball bearing conforming to the standard specification, with an inner diameter of 45 mm, an outer diameter of 75 mm and a width of 16 mm. It features a seal that seals on one side (RSR), whilst the other side remains open. Manufactured from 100Cr6 rolling-bearing steel, it features a robust sheet steel cage and operates reliably within a temperature range of -30 to +100 degrees.
What are the dimensions of the FAG 6009-RSR bearing?
The main dimensions are 45 mm for the bore (inner diameter), 75 mm for the outer diameter and 16 mm for the bearing width. These dimensions correspond to the standardised 6009 series. The cylindrical outer ring has a smooth finish, meaning it has neither a ring groove nor a flange, which allows for compact installation in cylindrical bearing seats.
What does the suffix RSR mean for this FAG bearing?
The abbreviation RSR stands for a contact-type, sliding seal on one side of the bearing. This sealing lip makes a resilient contact with the inner ring and prevents fine particles of dirt or moisture from entering. The opposite side is open, allowing grease or lubricating oil from inside the housing to reach the rolling elements directly.
What is the clearance of the 6009-RSR deep-groove ball bearing?
This roller bearing is manufactured with standard radial clearance. This means that the radial clearance between the outer ring, the balls and the inner ring corresponds to the specified standard range. This design is suitable for typical operating temperatures and standard fits, where there are no extreme temperature differences between the shaft and the housing.
What is the permissible temperature range for the FAG bearing?
The ball bearing is specified for an operating temperature range of -30 to +100 degrees. This range is determined by the contact materials of the seal and cage, as well as the material properties of the rolling bearing steel. Within this temperature range, the sealing lip retains its elasticity and the sheet steel cage retains its strength, which helps to ensure smooth and reliable operation.
What does the tolerance class P0/PN or ABEC 1 mean?
Tolerance class P0 (DIN standard PN, comparable to ABEC 1) defines the standard accuracy for dimensional, form and running deviations in rolling bearings. It ensures reliable interchangeability and fitting accuracy in standard industrial applications. Special precision classes are usually not required for standard applications, which is why P0 represents the standard, cost-effective option.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/
10013759