Deep Groove Ball Bearings SKF 6001

The SKF 6001 deep groove ball bearing is an open, single-row radial ball bearing with dimensions of 12 x 28 x 8 mm, designed for a wide range of industrial applications.

The 6001 deep groove ball bearing is one of the most commonly used roller bearings for shafts with an internal diameter of 12 mm. SKF manufactures this design from through-hardened standard roller bearing steel (100Cr6) with a sheet steel cage. As a single-row radial ball bearing, it primarily absorbs radial forces, but also supports shafts under axial loads on both sides. Thanks to its Explorer performance grade and enhanced dimensional and running accuracy, the bearing is suitable for demanding machine components operating continuously.

What is the 6001 deep groove ball bearing suitable for in industrial plant?

It is primarily used in compact mechanical assemblies with a cylindrical shaft seat. Its dimensions – with an outer diameter of 28 mm and a width of 8 mm – allow for space-saving housing designs. As the component is designed for operating temperatures ranging from -20 to +120 degrees, it covers typical operating conditions in general mechanical engineering. The version without sealing washers is ideal for applications where low friction resistance and lubrication via the machine’s internal oil circuit are required.

What advantages do tolerance classes P6 and P5, as well as the open design, offer?

This model combines dimensional accuracy to tolerance class P6 with running accuracy to class P5. Compared with standard tolerance, the tighter manufacturing tolerances reduce runout error and ensure smooth running during operation. As this is an open bearing, it has no integrated seals. An external seal in the housing therefore provides protection against dirt particles, whilst the lubricant is supplied via the overarching system.