16032 Deep Groove Ball Bearings by SKF
16032 Deep Groove Ball Bearings by SKF

SKF

Deep Groove Ball Bearings SKF 16032

Technical data
 
Inner diameter
160 mm
Outer diameter
240 mm
Width
25 mm
Ball rows
Single row bearing
Seal
None, open bearing
Cage
Sheet steel cage
Clearance
Normal radial clearance
Running accuracy
Tolerance class P0/PN2 / ABEC 1
Current insulation
No current insulation
Bore
Cylindrical bore
Outer ring
Without flange/groove
Material of rolling elements
Standard bearing steel
Weight
3,66 kg
Scale quantity Your discount Unit price
2 14,13 € 268,46 €
5 28,26 € 254,33 €
282,59 €
exkl. MwSt, zzgl. Versandkosten

14 ready to ship

Deep Groove Ball Bearings SKF 16032
In Stock

Deep Groove Ball Bearings SKF 16032

The SKF 16032 deep-groove ball bearing, with a bore of 160 mm, an outside diameter of 240 mm and a width of 25 mm, offers a narrow design for radial loads.

This single-row radial ball bearing, made from standard rolling-element bearing steel (100Cr6), primarily supports radial loads and also withstands axial forces in both directions. With an inside diameter of 160 mm and an outside diameter of 240 mm, the series features a comparatively small cross-section. The open design without sealing washers allows unhindered access of lubricant via the surrounding housing space and simplifies visual inspection of the rolling elements.

In which applications is the 16032 deep groove ball bearing used?

Bearing arrangements with large shaft diameters and, at the same time, limited radial installation space constitute the primary area of application for this narrow design. The bearing is primarily used in industrial gearboxes and machine drives where external sealing systems and centralised oil or grease lubrication are already integrated into the design. The robust sheet-steel cage guides the rolling elements precisely and maintains a uniform spacing between them, even at higher speeds.

What are the key operating characteristics of the SKF deep groove ball bearing 16032?

The bearing is manufactured to tolerance class P0/PN (corresponding to ABEC 1) and has standard radial clearance. The operating clearance is dimensioned such that, provided the bearing is fitted correctly and standard fit selections are used, reliable concentricity is maintained during operation. The permissible temperature range extends from -20 to +120 degrees Celsius. As no seals are fitted at the factory, the housing must protect the bearing location against the ingress of dirt and moisture.

What are the dimensions of the 16032 deep-groove ball bearing?

With an internal diameter of 160 mm, an external diameter of 240 mm and a width of 25 mm, the bearing has a particularly narrow cross-sectional geometry. This ratio is suitable for designs with a large shaft diameter where radial installation space is limited.

What does the ‘open’ design of this deep-groove ball bearing mean?

Open roller bearings do not come with integrated cover plates or sealing discs as standard. Lubricants such as oil or grease can circulate freely around the raceways and balls. They are therefore usually used in enclosed housings that are protected against dirt and moisture by external seals.

What type of cage is fitted in bearing 16032?

Inside, a sheet steel cage guides the balls at a defined distance apart and prevents them from coming into contact with one another. This cage design is rated for operating temperatures ranging from -20 to +120 degrees Celsius and is resistant to standard mineral oil-based lubricants.

What does the term ‘standard radial bearing clearance’ mean?

Standard radial bearing clearance refers to the factory-set radial clearance between the outer ring, the balls and the inner ring prior to installation. This clearance compensates for fit allowances during press-fitting and for thermal expansion during operation, in order to prevent the bearing from seizing.

What types of load can the bearing withstand?

The bearing primarily supports radial loads perpendicular to the shaft axis. Owing to the deep raceways in the rings, it can also accommodate axial forces in both directions, provided there are no excessive shock or tilting loads.

What is the tolerance class of this SKF bearing?

The manufacturing process complies with tolerance class P0/PN, which is equivalent to the international ABEC 1 standard. It comprises standardised specifications for dimensional, geometric and running accuracy, as required as standard in general mechanical engineering.

SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership

10007236
Product added to compare.
Product added to wishlist

Reset Password

New Account Register