Deep Groove Ball Bearings FAG 6314 -N

The FAG 6314-N deep-groove ball bearing, with a 70 mm bore and ring groove, provides a space-saving axial fixation within the bearing housing.

The single-row deep groove ball bearing 6314 -N is designed to accommodate radial forces as well as axial loads in both directions. Manufactured from standard rolling-element bearing steel 100Cr6 and fitted with a sheet steel cage, this unit is suitable for a wide range of industrial applications. As an open bearing, this version can be integrated directly into oil- or grease-lubricated systems, with an permissible temperature range of -30 to +150 degrees. As there are no seals, friction losses are minimal.

What is the 6314-N deep groove ball bearing suitable for?

Typical applications can be found in general mechanical engineering and in gearbox designs. With a bore diameter of 70 mm, an outside diameter of 159.7 mm and a width of 35 mm, the bearing can withstand corresponding loads. The open design facilitates straightforward lubricant circulation in oil-lubricated applications. When housing designs with limited axial clearance are used, the ring groove facilitates axial positioning by means of a retaining ring.

What is the function of the ring groove in the outer ring?

The suffix ‘N’ indicates a ring groove in the outer ring. This groove serves to secure the rolling bearing axially within the housing using a suitable retaining ring. This eliminates the need for complex housing shoulders or separate bearing covers. With tolerance class P0 (ABEC 1) and standard radial clearance, this design complies with current standards for smooth running under defined operating conditions.