Deep Groove Ball Bearings FAG 16007

The FAG 16007 deep-groove ball bearing, with dimensions of 35 × 62 × 9 mm, offers a particularly space-saving solution for rotating shafts.

The 16007 deep groove ball bearing is a single-row rolling bearing from FAG characterised by its narrow design, measuring just 9 mm in width. This open radial bearing primarily accommodates radial forces as well as moderate axial loads in both directions. The rings and rolling elements are made from standard bearing steel 100Cr6. Thanks to its manufacture to standard tolerance P0/PN, this design is suitable for a wide range of industrial applications and repair projects where radial and axial installation space is limited.

What is the FAG 16007 deep groove ball bearing suitable for?

Design engineers prefer to use this narrow bearing where there is limited axial installation space. Typical applications can be found in general mechanical engineering and in drive technology assemblies with compact mounting dimensions. Thanks to the cylindrical outer ring without a flange or groove, the component can be easily fitted into cylindrical housing bores. As the bearing is open at both ends, it can be integrated directly into existing oil or lubrication circuits.

What are the advantages of the open design with a sheet steel cage?

The sheet steel cage guides the rolling elements with low friction and contributes to even load distribution. The open design allows the selected lubricant to circulate freely, but requires a clean installation environment or external housing seals to protect against dirt particles. With the standard radial bearing clearance, the component is suitable for typical operating conditions. The permissible temperature range extends from –20 to +150 degrees Celsius, ensuring that the bearing retains its dimensional stability even under thermal stress.