Deep Groove Ball Bearings FAG 4310 -B-TVH

The 4310 -B-TVH double-row deep-groove ball bearing from FAG Wälzlager, with dimensions of 50x110x40 mm, offers a high load-carrying capacity with normal radial clearance for a wide range of industrial applications.

The 4310 -B-TVH deep groove ball bearing from FAG Wälzlager is a double-row radial ball bearing made from standard 100Cr6 bearing steel. Thanks to the two rows of balls, the design can withstand higher radial forces than single-row versions of the same size. With dimensions of 50 mm bore, 110 mm outer diameter and 40 mm width, the component remains compact. The open bearing has no integrated sealing rings. It is primarily used in bearing locations where lubricating oil or grease is specifically supplied from the outside.

What is the 4310 -B-TVH double-row deep groove ball bearing suitable for?

Double-row deep-groove ball bearings are primarily used in bearing locations subject to high radial loads where there is insufficient installation space for roller bearings. Typical applications include shaft mountings in general mechanical engineering subject to combined loads. The design accommodates not only radial forces but also axial forces in both directions. As the outer ring is manufactured without a flange or groove, the bearing can be fitted flush into cylindrical housing bores. The permissible temperature range of -30 to +120 degrees supports a wide variety of industrial operating conditions.

What properties does the polyamide cage in the 4310-B-TVH deep groove ball bearing offer?

The designation TVH refers to a lightweight polyamide cage that maintains an even spacing between the balls in both rows. The material dampens vibrations and ensures smooth running within the machine. When designing the bearing arrangement, it is advisable to specify the standard radial clearance and tolerance class P0 or ABEC 1. As the bearing is of an open design, the assembly requires an external housing seal and a continuous supply of lubricant.