Deep Groove Ball Bearings FAG 6016

The FAG 6016 deep-groove ball bearing is an open, single-row rolling bearing with dimensions of 80 × 125 × 22 mm, designed primarily for radial loads.

The 6016 deep groove ball bearing is a versatile single-row rolling bearing. Manufactured from standard roller bearing steel 100Cr6, this bearing accommodates shafts with a diameter of 80 mm in a housing with an outer diameter of 125 mm. The design, which does not include sealing washers, allows for direct lubrication via the machine’s existing oil or grease circuit. With a standard radial clearance and tolerance class P0/PN, this model is suitable for standard applications in mechanical engineering.

What is the 6016 deep groove ball bearing suitable for?

Design engineers and maintenance technicians primarily use the 6016 deep groove ball bearing to accommodate radial forces whilst simultaneously transmitting moderate axial forces in both directions. Typical applications include rotating machine components and industrial drives with oil-lubricated or separately sealed housings.

Thanks to its sheet steel cage and open design, the bearing can operate within a temperature range of -20 to +150 degrees. As the lubricant reaches the rolling elements unimpeded, the bearing operates with low friction in continuously lubricated machine systems.

What are the key considerations for the 6016 open deep-groove ball bearing?

As this model has no integrated seals, protection against dirt and moisture must be provided by the surrounding housing structure. Targeted initial and subsequent lubrication with suitable grease or lubricating oil is also required.

Before installation, check the cylindrical fit between the shaft and the housing. The outer ring has neither a flange nor a ring groove, which allows for easy axial positioning in smooth through-bores. The design complies with the standard tolerance class ABEC 1.