Deep Groove Ball Bearings FAG 63005 -2RSR

The FAG 63005 -2RSR deep-groove ball bearing, with dimensions of 25x47x16 mm and a sliding seal on both sides, offers effective protection against contamination under normal radial loads.

The FAG 63005 -2RSR deep groove ball bearing is designed as a single-row rolling bearing for a wide range of industrial applications. Manufactured from 100Cr6 rolling-element bearing steel, the component primarily withstands radial loads as well as moderate axial forces. Fitted with a sheet steel cage and standard radial clearance, this deep-groove ball bearing is characterised by precise concentricity. The outer ring is cylindrical in design and has neither a groove nor a flange, which facilitates installation in standard housings. Design engineers and maintenance technicians specifically choose this design for compact shaft mountings.

What is the 63005 -2RSR deep groove ball bearing suitable for?

The 63005 -2RSR deep groove ball bearing is primarily used in bearing locations where the shaft needs to be protected from dirt particles and moisture. Typical applications include compact drive units and general machinery designs. With key dimensions of a 25 mm bore, 47 mm outside diameter and 16 mm width, the roller bearing fits into specified installation spaces. The design, which complies with tolerance class P0 or ABEC 1, ensures smooth power transmission during operation.

What are the benefits of the double-sided 2RSR seal?

The double-sided seal retains grease inside the bearing and protects the raceways against ambient dust and splash water. This reduces maintenance requirements compared with open designs. Please note the permissible temperature range of -20 to +100 degrees Celsius, as specified by the seal elements. Because the sealing lips bear against the inner ring, there is a slightly higher frictional resistance than with non-contacting cover plates, which should be taken into account in the thermal design.