Cylindrical Roller Bearings FAG N207 -E-M1

The FAG N207 -E-M1 cylindrical roller bearing is a single-row non-locating bearing with a brass cage, measuring 35 × 72 × 17 mm, designed for high radial loads.

As a single-row radial roller bearing, the FAG N207 -E-M1 cylindrical roller bearing withstands high radial forces. Thanks to the line contact between the cylindrical rollers and the raceways, this design offers exceptional rigidity. With a bore of 35 mm, an outside diameter of 72 mm and a width of 17 mm, the bearing complies with standard industrial dimensions. It is designed as an open rolling bearing without sealing rings, allowing lubricant to circulate freely and heat to be dissipated rapidly during operation.

In which operating conditions does the N207 -E-M1 cylindrical roller bearing accommodate radial loads?

This cylindrical roller bearing is primarily used for purely radial loads where rigid guidance and high load-carrying capacities are required. The solid brass cage is designed for applications involving dynamic loads or vibrations. The permissible temperature range is between –30 and +150 degrees Celsius. As the bearing has an open design, lubrication and protection against foreign particles are provided by the surrounding housing structure.

What are the advantages of the N-type floating bearing with a brass cage?

The N design is characterised by two fixed flanges on the inner ring, whilst the outer ring is flangeless and removable from both sides. This allows the bearing to compensate for axial thermal expansion of the shaft with low friction within the bearing. This feature also makes it considerably easier to fit the two rings separately. The bearing has a tolerance class of Normal (P0/PN or ABEC 1) and a standard radial clearance, which facilitates installation in standard fits.