Cylindrical Roller Bearings FAG NUP214 -E-XL-TVP2

The FAG NUP214 -E-XL-TVP2 cylindrical roller bearing, measuring 70 × 125 × 24 mm, provides precise guidance as a fixed bearing for heavy radial loads.

This single-row cylindrical roller bearing, the NUP214 -E-XL-TVP2, combines a high radial load capacity with the ability to provide axial fixation. The NUP design features two fixed flanges on the outer ring and one fixed flange and one loose flange disc on the inner ring. As a result, the bearing absorbs axial forces from both directions and acts as a reliable fixed bearing within the system. The open component operates with standard radial clearance and functions within a temperature range of -30 to +120 degrees.

What are the industrial applications for the NUP214 -E-XL-TVP2 cylindrical roller bearing?

Design engineers and maintenance personnel use this design primarily where shafts are subject to high radial forces and must also be axially fixed in both directions. Typical applications can be found in general mechanical engineering as well as in powertrains with combined loads. Thanks to the line contact of the cylindrical rollers, the design rigidly absorbs high radial loads. As a fixed bearing, it provides axial guidance for the rotating shaft.

What are the key features of the NUP design with a polyamide cage?

The combination of the NUP design and the polyamide cage (TVP2) offers clear advantages in terms of installation and operational characteristics. The roller-guided plastic cage is characterised by its low weight, which reduces inertial forces during operation and promotes quiet, low-friction running. Thanks to the loose flange, the bearing can be fitted in stages. As this is an open bearing without an integrated seal and without a lubrication groove in the outer ring, provision is made for external sealing and lubrication via the housing.