Cylindrical Roller Bearings FAG NUP210 -E-XL-TVP2

The FAG NUP210 -E-XL-TVP2 cylindrical roller bearing is designed as a fixed bearing for shafts measuring 50x90x20 mm and can accommodate high radial loads.

The NUP210 -E-XL-TVP2 cylindrical roller bearing is a single-row radial roller bearing from FAG with a cylindrical bore. Thanks to the line contact between the rollers and raceways, the design can withstand high radial loads. With an inner diameter of 50 mm, an outer diameter of 90 mm and a width of 20 mm, this version complies with tolerance class P0 or ABEC 1. The open bearing has standard radial clearance and operates within a temperature range of -30 to +120 degrees.

In which applications does the NUP210 -E-XL-TVP2 fixed bearing prove its worth?

This cylindrical roller bearing is suitable for applications involving heavy radial loads where the shaft must be guided in both axial directions simultaneously. As a fixed bearing, the NUP design accommodates not only the main radial load but also smaller axial guiding forces in both directions.

Typical applications are found in machine designs with shaft fixation on both sides. As the outer ring has no lubrication groove, grease or lubricating oil is supplied directly via the housing design of the respective system.

What are the key features of the TVP2 polyamide cage?

The TVP2 polyamide cage guides the cylindrical rollers whilst being lightweight itself, and reduces friction and noise during operation. This cage material has a permissible temperature range of –30 to +120 degrees, which defines the thermal limits of the bearing location.

As this is an open bearing without integrated seals, installation requires a clean environment. An external housing seal protects the raceways from dirt and keeps the lubricant within the bearing chamber.