SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 10 | 5,94 € | 112,77 € |
| 20 | 11,88 € | 106,83 € |
The SKF NJ2310 ECP/C3 cylindrical roller bearing is a single-row support bearing (50x110x40 mm) with increased C3 clearance and a polyamide cage for high radial loads.
The NJ2310 ECP/C3 cylindrical roller bearing is manufactured by SKF and, as a single-row roller bearing, can withstand high radial loads. With dimensions of a 50 mm bore, 110 mm outside diameter and 40 mm width, the component is suitable for demanding industrial applications. The open design without sealing washers allows for direct lubrication via the surrounding housing structure. An optimised internal design supports the even distribution of load across the rolling elements.
This cylindrical roller bearing is primarily used as a support bearing in shaft mountings where high radial loads and unilateral axial guidance forces occur. With two fixed flanges on the outer ring and one flange on the inner ring, the NJ design guides the shaft in one direction.
In the opposite direction, the bearing arrangement compensates for thermal length changes via the axial displacement. The inner ring can be removed from one side, which facilitates the separate mounting of the bearing rings onto the shaft and housing.
The C3 classification indicates a slightly increased radial bearing clearance compared with the standard range. This clearance helps to prevent harmful stresses when temperature differences arise between the rings or when tight shaft fits cause the inner ring to expand. The polyamide cage guides the roller set within a temperature range of -30 to +120 degrees Celsius.
Integrated manufacturing standards combine the standard dimensional accuracy P0 (ABEC 1) with increased running accuracy to P6 (ABEC 3). As the outer ring is manufactured without a groove or lubrication bore, the lubricant is supplied directly via the bearing housing.
With an internal diameter of 50 mm, an external diameter of 110 mm and a width of 40 mm, this version has standardised main dimensions. It is a single-row cylindrical roller bearing without electrical insulation. As the inner ring can be removed from one side, the rings can be fitted separately onto the shaft and housing during assembly.
A characteristic feature of the NJ design is the presence of two fixed flanges on the outer ring and one fixed flange on the inner ring. This enables the component to function as a support bearing: in addition to heavy radial loads, it also absorbs axial forces from one direction. In the opposite direction, the design allows for axial displacement to compensate for thermal expansion.
A C3 suffix indicates increased radial clearance beyond the standard dimension. This feature is recommended for applications involving elevated operating temperatures or tight press fits. The increased radial clearance helps to ensure that the rolling elements roll freely even during thermal expansion and that no impermissible residual stresses develop in the bearing.
The permissible operating range for this model is between -30 and +120 degrees Celsius. This range is limited, amongst other things, by the built-in polyamide cage, which guides the roller set. When selecting the lubricant for the housing, care should be taken to ensure that its specification is suitable for this temperature range.
As the bearing has no integrated sealing washers and the outer ring is manufactured without a lubrication groove or lubrication bore, the lubricant is supplied via the housing. An external housing seal serves to limit lubricant leakage and protect the raceways from dirt particles.
This component combines dimensional accuracy of class P0 or ABEC 1 with finer running accuracy of class P6 or ABEC 3. This combination ensures smooth running of the cylindrical rollers whilst maintaining standardised mounting dimensions for the shaft and housing bore.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership