FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 10 | 6,17 € | 117,19 € |
| 20 | 12,34 € | 111,02 € |
FAG single-row cylindrical roller bearing NJ216 -E-XL-TVP2 with a polyamide cage and main dimensions of 80 x 140 x 26 mm, designed for high radial loads.
The FAG NJ216 -E-XL-TVP2 cylindrical roller bearing is a single-row radial roller bearing for industrial applications under demanding operating conditions. Thanks to the line contact between the rollers and raceways, this model can withstand significant radial forces. With a bore of 80 mm, an outside diameter of 140 mm and a width of 26 mm, the bearing is suitable for shaft mountings in general mechanical engineering.
The NJ216 -E-XL-TVP2 cylindrical roller bearing is primarily used where high radial forces are present and axial guidance in one direction is required at the same time. In shaft mountings, the component supports the shaft on one side and absorbs axial forces in that direction. The inner ring, which can be removed from one side, also facilitates the separate assembly of the inner and outer rings in confined installation spaces.
The version with a TVP2 polyamide cage is characterised by the low weight of the rotating rolling element guide, which promotes smooth running. As an NJ-type support bearing, the outer ring has two fixed flanges, whilst the inner ring has one flange. This design allows for a defined axial displacement in one direction, enabling thermal linear changes in the shaft to be compensated for.
The main dimensions are 80 mm bore diameter, 140 mm outer diameter and 26 mm overall width. The component complies with tolerance class P0/PN or ABEC 1 and is designed as a single-row cylindrical roller bearing. The outer ring has no groove or lubrication bore.
In the NJ design, the outer ring guides the rollers between two fixed flanges, whilst the inner ring has only one flange. This allows the inner ring to be removed from one side. The bearing can accommodate axial forces in one direction whilst also allowing axial displacement of the shaft relative to the housing.
The polyamide cage guides the cylindrical rollers with precision and, thanks to its low mass, reduces inertial forces during changes in rotational speed. The material behaves elastically and operates quietly. It is designed for the specified operating temperature range of -30 to +120 degrees and must be compatible with the lubricant used.
This model is manufactured with standard radial bearing clearance. This standard bearing clearance is suitable for standard fit conditions on the shaft and housing, as well as for typical operating temperatures where there are no extreme temperature differences between the inner and outer rings.
The permissible temperature range is from -30 to +120 degrees. This range is limited by the material of the polyamide cage. As this is an open bearing without integrated sealing washers, the actual operating range also depends on the thermal properties of the lubricant used.
As the bearing is designed as an open type without its own seal, the lubricant is supplied via the surrounding structure. Both oil and grease lubrication can be used. The housing design should incorporate suitable external seals to prevent dirt or moisture from entering the rolling element area.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/