FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 10 | 4,66 € | 88,49 € |
| 20 | 9,32 € | 83,83 € |
The FAG NJ213 -E-XL-TVP2 cylindrical roller bearing is a single-row support bearing with a polyamide cage, with main dimensions of 65 × 120 × 23 mm, designed for high radial loads.
As a radial roller bearing, the FAG NJ213 -E-XL-TVP2 cylindrical roller bearing withstands very high radial forces and provides stable support for 65 mm diameter shafts within the housing. Due to the line contact of the cylindrical rollers, this design is, by its very nature, capable of transmitting higher forces than ball bearings of the same dimensions. As an open design without an integrated seal, the bearing fits directly into lubricated housing assemblies. For design and maintenance, the bearing provides a reliable basis for industrial shaft mountings with standardised normal tolerances.
This bearing is primarily used as a support bearing in shaft mountings subject to high radial forces and unilateral axial guidance forces. Due to the NJ design, the outer ring has two solid flanges and the inner ring has one solid flange. This enables the bearing to absorb unidirectional axial forces whilst allowing axial displacement in the opposite direction. This compensates for temperature-induced changes in the shaft’s length during operation without generating stress in the bearing arrangement.
The designation TVP2 refers to a polyamide cage that guides the cylindrical rollers quietly and with low friction. Compared with metal cages, this material reduces the weight and dampens vibrations during operation. When designing the bearing, please note the permissible temperature range of -30 to +120 degrees Celsius. The inner ring can be removed from one side, which facilitates the separate mounting of the inner and outer rings onto the shaft and housing.
With an internal diameter of 65 mm, an external diameter of 120 mm and a width of 23 mm, the bearing conforms to the main metric dimensions of size 213. Before installation, the shaft seat and housing bore should be checked to ensure that the fit and axial play of the bearing rings are precisely matched.
In the NJ design, the outer ring has two solid flanges, whilst the inner ring has a single flange. This design enables the bearing to accommodate axial forces from one direction and acts as a support bearing. The shaft can move axially in the opposite direction, which compensates for thermal expansion in the housing.
The suffix TVP2 denotes a polyamide cage. This type of cage is characterised by its low mass, favourable running characteristics and smooth roller guidance. It is suitable for operating temperatures ranging from -30 to +120 degrees Celsius. Within this temperature range, the material retains its elastic properties and aids the guidance of the cylindrical rollers.
This model features standard radial bearing clearance (CN), which is designed for standard mounting conditions and normal operating temperatures. The bearing clearance describes the radial play of the rolling elements between the inner and outer rings when the bearing is unmounted. After installation, this play is reduced to the specified dimension due to the interference fit.
As an open bearing without integrated sealing washers, the bearing housing requires an external seal to protect against dirt and moisture. Lubrication is provided by the surrounding oil bath, a recirculating lubrication system or a suitable grease fill. As the outer ring has no lubrication bore, the lubricant is fed to the rollers from the side.
The bearing is manufactured to tolerance class P0 (standard tolerance PN) or ABEC 1. This classification defines the permissible dimensional and concentricity deviations for diameter and width. In industrial mechanical engineering, this standard precision offers a good balance between cost-effectiveness and smooth running in general shaft bearing arrangements.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/