FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 25 | 2,19 € | 41,63 € |
| 35 | 4,38 € | 39,44 € |
The FAG NJ208 -E-XL-TVP2 cylindrical roller bearing, with dimensions of 40x80x18 mm, offers a single-row support bearing solution for radial and unilateral axial loads.
As a single-row roller bearing, the FAG NJ208 -E-XL-TVP2 cylindrical roller bearing accommodates high radial forces in mechanical engineering applications. Thanks to the line contact of the cylindrical rollers, the design can transmit greater forces than a deep-groove ball bearing of the same dimensions. With a bore of 40 mm, an outside diameter of 80 mm and a width of 18 mm, this open bearing operates within a temperature range of -30 to +120 °C. As the inner ring can be removed from one side, the component can be fitted separately onto the shaft and housing.
This bearing is primarily designed to support high radial loads and also guides the shaft in an axial direction. As a typical support bearing, the NJ design features two fixed flanges on the outer ring and one fixed flange on the inner ring. As a result, the bearing assembly freely compensates for axial length changes of the shaft in one direction, whilst transmitting guiding forces in the opposite direction. Typical applications include shaft mountings with single-sided axial guidance and high radial operating forces.
The suffix TVP2 on this FAG bearing denotes a lightweight polyamide cage. This material reduces the inertial forces of the roller guidance and promotes low-vibration operation. This design features a standard radial clearance and the standard tolerance class P0 or ABEC 1. As this is an open bearing without its own seals and without a lubrication groove in the outer ring, the lubricant is supplied directly via the machine housing.
The bearing has a bore of 40 mm, an outside diameter of 80 mm and a width of 18 mm. These dimensions correspond to the standardised main dimensions for single-row cylindrical roller bearings. The component is manufactured to the standard tolerance class P0 or ABEC 1.
The NJ design functions as a support bearing with two fixed flanges on the outer ring and one flange on the inner ring. It accommodates high radial forces and also supports axial forces in one direction. In the opposite direction, the bearing allows for axial displacement to compensate for thermal expansion.
The TVP2 polyamide cage guides the rolling elements precisely whilst being lightweight. It absorbs shocks during operation and runs quietly. The permissible temperature range for the bearing with this cage is from -30 to +120 °C.
The bearing has no sealing washers, nor does the outer ring have a groove or lubrication bore. Lubricating oil or grease reaches the raceways via the housing design. External seals on the connecting structure protect the rolling elements from dirt and moisture.
Normal bearing clearance refers to the specified radial clearance between the rollers and raceways as supplied. It is matched to the standard fits of the shaft and housing. After press-fitting, sufficient residual clearance remains to ensure low-friction concentricity without any unacceptable stresses.
The inner ring of this single-row cylindrical roller bearing can be removed from one side. This allows the inner and outer rings to be fitted separately onto the shaft and housing. This makes handling easier during assembly and protects the raceways from damage during fitting.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/