Cylindrical Roller Bearings FAG NJ205 -E-XL-TVP2

The FAG NJ205 -E-XL-TVP2 cylindrical roller bearing, measuring 25x52x15 mm, withstands high radial loads and provides single-sided axial support for shafts.

The NJ205 -E-XL-TVP2 cylindrical roller bearing is a single-row radial roller bearing designed for industrial applications involving high radial loads. This open bearing has a bore of 25 mm, an outer diameter of 52 mm and a width of 15 mm. Thanks to the line contact of the cylindrical rollers, the design withstands high radial forces and transfers them to the housing.

When is the NJ205 -E-XL-TVP2 cylindrical roller bearing suitable as a support bearing?

This design is used where, in addition to radial forces, axial guiding forces occur in one direction. The NJ design features two fixed flanges on the outer ring and one fixed flange on the inner ring. As a result, the bearing acts as a support bearing that locks the shaft axially in one direction, whilst allowing free axial movement in the opposite direction. The inner ring can be removed from one side, which facilitates the separate assembly of both bearing rings.

What advantages does the TVP2 polyamide cage offer during operation?

The designation TVP2 indicates a polyamide cage. This cage is characterised by its low weight and elastic running characteristics, which reduce noise during operation. The bearing is designed for a temperature range of -30 to +120 degrees and has standard radial clearance in tolerance class P0/PN. As the outer ring is designed without a groove or lubrication bore, lubricant is supplied via the lateral end faces.