Cylindrical Roller Bearings FAG NU311 -E-XL-TVP2

The FAG NU311 -E-XL-TVP2 cylindrical roller bearing (55x120x29 mm) withstands high radial loads and functions as a separable idler bearing in mechanical engineering.

The FAG NU311 -E-XL-TVP2 cylindrical roller bearing is a single-row rolling bearing designed for industrial applications. With a bore of 55 mm, an outside diameter of 120 mm and a width of 29 mm, the design withstands high radial loads. The line contact between the cylindrical rollers and the raceways enables a higher load-carrying capacity compared to deep-groove ball bearings of the same dimensions with point contact.

In which applications is the NU311 -E-XL-TVP2 cylindrical roller bearing used?

This radial roller bearing is particularly suitable for mounting positions where high radial forces occur and axial length changes in the shaft must be compensated for. Typical applications include mechanical drive trains and rotating shafts subject to purely radial loads. As the bearing is designed as a floating bearing, it allows for axial displacement of the shaft directly between the rollers and the inner ring, thereby preventing stress concentrations in the system.

What are the distinctive features of the NU design and the polyamide cage?

The NU design features two fixed flanges on the outer ring, whilst the inner ring is flangeless. This allows the inner ring to be removed from either side, which simplifies both installation and removal from the shaft. The integrated polyamide (TVP2) window cage guides the rolling elements quietly whilst being lightweight. The design is rated for operating temperatures from -30 to +120 degrees and complies with tolerance class P0 or ABEC 1.