Axial Deep Groove Ball B. SKF 53313

The SKF 53313 axial deep-groove ball bearing accommodates unilateral axial loads with a bore diameter of 65 mm.

The SKF 53313 axial deep groove ball bearing is designed for the axial guidance of shafts in mechanical assemblies. The design comprises a shaft ring, a housing ring and a guided set of balls in a sheet steel cage. Manufactured from standard rolling-bearing steel (100Cr6), this design is suitable for use in a temperature range from –30 to +150 degrees Celsius. Due to its design, this type of bearing does not accommodate radial forces, but provides stable support for shafts against unidirectional axial forces.

For which loads is the 53313 axial deep-groove ball bearing suitable?

This axial bearing is primarily used in general mechanical engineering for designs where defined axial forces must be absorbed in one direction. Thanks to its manufacture to standard tolerances (tolerance class P0/PN or ABEC 1), the component can be integrated directly into standardised mounting dimensions. The sheet steel cage guides the rolling elements with minimal vibration and keeps friction to a minimum during operation.

When is a washer recommended for bearing 53313?

The housing washer in this design has a spherical contact surface which, in combination with a suitable shim, compensates for misalignment or angular errors during installation. As the bearing is supplied ex-works without a shim, select the appropriate counterpart to suit your housing bore. Where the mounting surfaces are machined at right angles, the bearing can also be supported directly within the housing, provided the shaft is not misaligned.