Axial Deep Groove Ball B. FAG 53212

The FAG 53212 single-direction axial deep-groove ball bearing is designed for shafts measuring 60x95x28 mm and supports high axial loads in one direction.

The FAG 53212 axial deep-groove ball bearing is designed as a separable rolling bearing to accommodate axial loads from a single direction. With an inside diameter of 60 mm, an outside diameter of 95 mm and a height of 28 mm, this model is suitable for specific installation space requirements in mechanical engineering. The integrated sheet steel cage guides the rolling elements evenly along their raceways. The material used is standard roller bearing steel (100Cr6), which is designed for operating temperatures ranging from –30 °C to +150 °C. The bearing is manufactured to tolerance class P0/PN (corresponding to ABEC 1).

What is the 53212 axial deep-groove ball bearing suitable for in industrial applications?

This bearing absorbs axial forces exclusively and supports rotating shafts in one axial direction. The bearing must not be subjected to radial forces, as these must be absorbed by separate radial bearings.

Typical applications are found in industrial designs subject to purely axial loads and a dominant thrust force in one direction. As the component is manufactured from 100Cr6 rolling bearing steel, it is suitable for continuous operation under stable lubrication conditions.

When is a washer required for the 53212 axial deep groove ball bearing?

The 53212 axial deep-groove ball bearing features a spherical housing washer. In conjunction with a separately available shim, this design compensates for static misalignment and angular misalignment between the shaft and housing.

The scope of supply includes the axial deep-groove ball bearing without a shim. Before fitting, check whether your housing bore is flat or shaped to accommodate a shim. For rigid, right-angled bearing seats, an additional shim is not required; however, where mating surfaces are out of alignment, it counteracts harmful edge pressures.