Axial Deep Groove Ball B. FAG 53210

The 53210 axial deep-groove ball bearing from FAG Wälzlager, with dimensions of 50 × 78 × 23.5 mm, accommodates single-sided axial forces in one direction.

The 53210 axial deep groove ball bearing is designed as a single-direction axial bearing to accommodate pure axial loads and provide axial support for shafts. Manufactured from standard rolling-bearing steel (100Cr6) and fitted with a sheet steel cage, the bearing guides the rolling elements in an orderly manner along their circular path. With a bore of 50 mm, an outside diameter of 78 mm and a height of 23.5 mm, this version is suitable for use in assemblies in mechanical engineering and fixture construction.

In which applications is the 53210 axial deep groove ball bearing used?

This rolling bearing is suitable for designs in which only axial forces act in a single direction. Typical applications include vertical shaft guides, spindle drives and gearbox designs in which radial forces are supported by separate rolling bearings. As axial deep-groove ball bearings, by their very design, do not accommodate radial loads, this model is intended purely for axial guidance. The operating temperature range of –30 to +150 degrees allows for operation under a variety of thermal conditions.

When is the angular adjustability of the 53210 bearing important?

The 532 series features a spherical housing washer that can compensate for misalignment between the shaft and the mounting surface. This adjustment takes effect as soon as the bearing is fitted together with a suitable washer to compensate for misalignment. Please note when planning your work that this item comprises only the axial deep-groove ball bearing without a washer. Manufacture to tolerance class P0/PN or ABEC 1 ensures dimensional accuracy in accordance with the relevant standards within the installation space.