Axial Deep Groove Ball B. FAG 52315

The 52315 axial deep-groove ball bearing accommodates axial forces from both directions and provides precise shaft guidance with dimensions of 60 × 135 × 79 mm.

The FAG 52315 axial deep-groove ball bearing is designed to precisely accommodate axial loads from both directions in industrial assemblies. Manufactured from standard roller bearing steel (100Cr6), this component guides shafts in both axial directions. Due to its design, the bearing cannot accommodate purely radial forces. With an inside diameter of 60 mm, an outside diameter of 135 mm and a mounting width of 79 mm, the bearing meets standardised requirements in mechanical engineering.

What is the 52315 double-acting axial deep groove ball bearing suitable for?

This rolling bearing is suitable for designs in which axial loads change direction during operation or where shafts need to be axially fixed in both directions. As the component is not angle-adjustable, it requires precisely machined, perpendicular contact surfaces on the housing and shaft. Typical areas of application include industrial applications with varying axial forces. The sheet steel cage guides the rolling elements evenly under continuous load.

What is important when fitting bearing 52315 without a shim?

When fitting this item without separate washers, care must be taken to ensure the connecting parts are precisely aligned. Misalignment or skewing cannot be compensated for with this design. The component complies with standard tolerance class P0/PN (ABEC 1) and is designed for operating temperatures ranging from -30 to +150 degrees. For lubrication, select a lubricant whose thermal specification is suitable for this temperature range.