Axial Deep Groove Ball B. FAG 52209

The FAG 52209 double-acting axial deep groove ball bearing (35x73x37 mm) accommodates axial forces in both directions and guides shafts axially.

The FAG 52209 axial deep groove ball bearing is a double-acting rolling bearing designed to support purely axial loads. With a bore of 35 mm, an outside diameter of 73 mm and a width of 37 mm, this version guides shafts in both directions. Manufactured from standard rolling-element bearing steel 100Cr6, the components offer dimensional stability for industrial applications. A sheet steel cage guides the rolling elements within a temperature range of -30 to +150 degrees.

What is the 52209 axial deep groove ball bearing suitable for?

The bearing absorbs axial forces from alternating directions. The double-sided design supports shafts on both sides and prevents axial displacement. Typical applications are found in mechanical engineering in bearing arrangements where axial thrust occurs on both sides. As the bearing is designed to accommodate axial loads only, designers typically combine it in practice with separate radial bearings on the same shaft.

What are the key features of the 52209 bearing?

This rolling bearing complies with tolerance class P0/PN (ABEC 1) and is not angularly adjustable. The contact surfaces in the housing and on the shaft must be perpendicular to the axis of rotation, as misalignment leads to edge loading. The scope of supply comprises the axial bearing only, without washers. During design, care must be taken to ensure that the housing plates are supported on a flat surface and that a lubricant suitable for the operating range of -30 to +150 degrees is used.