Axial Deep Groove Ball B. FAG 52207

The FAG 52207 double-acting axial deep-groove ball bearing, measuring 30x62x34 mm, guides shafts axially and accommodates axial loads from both directions.

The 52207 axial deep-groove ball bearing is a double-acting rolling bearing designed to accommodate pure axial forces from both directions. With compact dimensions of a 30 mm bore, 62 mm outside diameter and 34 mm width, this FAG roller bearing provides axial support for rotating components. Manufactured from standard roller bearing steel (100Cr6) with a sheet steel cage, the assembly is designed for operating temperatures ranging from –30 to +150 degrees. Due to its design, the component must not bear radial forces.

In which assemblies is the 52207 axial deep-groove ball bearing used?

This bearing is used where axial forces act alternately on a shaft, whilst radial guidance is provided by separate radial bearings. Typical applications are found in general mechanical engineering for shaft mountings subject to axial loads on both sides. As this version is not angularly adjustable, the design requires a contact surface on the housing and shaft that is perfectly perpendicular. This prevents unilateral edge loads on the rolling element raceways.

What distinguishes the double-acting design without a shim?

As a double-acting bearing, this design consists of a central shaft disc, two housing discs and two ball rings. This allows it to guide the shaft axially in both directions. The scope of supply includes the rolling element set only, without shims. Manufacturing is carried out to tolerance class P0/PN or ABEC 1. When designing the system, ensure that the connecting parts are mounted on a flat surface, as flat housing discs do not automatically compensate for misalignment or shaft deflection.