Axial Deep Groove Ball B. FAG 52214

The FAG 52214 axial deep-groove ball bearing accommodates axial forces from both directions and has dimensions of 55 × 105 × 47 mm.

The 52214 axial deep-groove ball bearing is designed as a double-acting rolling bearing to accommodate pure axial loads from both directions. The construction comprises a central shaft ring, two housing rings and two sets of balls with a sheet steel cage. The components are made from standard rolling-element bearing steel 100Cr6 and are designed for a temperature range of -30 to +150 degrees.

In which applications is the double-acting bearing used?

This rolling bearing is used for the precise axial guidance of shafts subject to alternating thrust forces in both directions. As axial deep-groove ball bearings, by design, cannot accommodate radial forces, the bearing arrangement must be combined with separate radial bearings. The separable design facilitates assembly, as the shaft ring, housing rings and ball cages can be fitted one after the other.

What installation requirements apply to the non-angle-adjustable design?

The double-acting design secures components axially in both directions but does not compensate for misalignment. As the flat housing washers are not angularly adjustable, the contact surfaces on the housing and shaft must be precisely perpendicular to the axis of rotation. The scope of supply includes the axial deep-groove ball bearing without shims. The bearings are manufactured to the standard tolerance class P0/PN or ABEC 1.